power supply ASPS | Bộ nguồn ASPS Vibro-Meter

Auxiliary sensor power supply ASPS Vibro-Meter

High-quality, high-reliability auxiliary sensor power supply for VM600 rack-based machinery monitoring systems. An ASPS auxiliary sensor power supply is installed in the rear of a VM600 ABE04x rack.

Features

• Auxiliary sensor power supply for VM600 system racks
• AC-input version (115/230 VAC)
• Two independant 24 VDC 1.1 A outputs
• Short-circuit protection
• Internal redundancy (two AC-DC converters per output) for high availability

SPECIFICATIONS

Electrical

Input voltage range : 88 to 264 VAC (47 to 63 Hz) or 125 to 373 VDC

The ASPS takes its AC mains supply from an adjacent RPS 6U rack power supply unit (AC version) in the same VM600 rack. Therefore, refer also to the input voltage range specified in the RPS 6U data sheet.

Current Consumption

• AC : 0.40 A at 230 VAC / 0.7 A at 115 VAC

Nominal output

• Voltage : 2 x 24 VDC (the two outputs can be connected in parallel)

• Current : 2 x 1.1 A (the two outputs can be connected in parallel)

• Power : 52.8 W max. (2 x 26.4 W)

Stability of the output : 1.0% (for 10 to 100% load variation) 

Ripple (output voltage noise) : 80 mV (peak to peak)

Protection against permanent shortcircuit (current limit) : Yes

Environmental

Temperature range

• Operation : −25 to +65°C (−14 to +149°F)

• Storage : −40 to +85°C (−40 to +185°F)

Relative humidity (non-condensing) : <90%

MTBF : >300000 hours, according to IEC 1709 (SN 29500)

Connectors

Conductor cross-section : ≤1.5 mm2 (max.)

Physical

Dimensions

• Height : 6 U (262 mm, 10.3 inches)

• Width : 40 mm (1.6 inches)

• Depth : 110 mm (4.3 inches)

Weight : 890 g approx

Ordering number

200-582-810-0Hh

CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ TĂNG MINH PHÁT

Địa chỉ: Số 1, Đường số 27, phường Hiệp Bình Chánh, Quận Thủ Đức, Tp.HCM.

Hotline: (+84) 969 714 350   -    0914 599 052

Skype: 0969 714 350

Zalo: 0969 714 350

Email: sale16@tmpvietnam.com