IOC 4T adaptor | Bộ nguồn IOC 4T Vibro-Meter

200-560-900-0xx

Voltage-drop adaptor

FEATURES

» From the Vibro-Meter® product line

» Voltage-drop adaptor:

−27 V input to −24 V output

−27 V input to −18 V output

or straight-through connection

» Designed for operation with MPC 4 / IOC 4T card pairs

» Inserts directly into the J1 and/or J2 screwterminal sockets of an IOC 4T card

High-quality, high-reliability voltage-drop adaptor for the MPC4/IOC4T card pairs used by VM600 rack-based machinery monitoring systems. The IOC4T voltage-drop adaptor supports 4 channels, which can be dynamic channels or tachometer (speed) channels. An IOC4T voltage-drop adaptor is installed into a screw-terminal socket (J1 or J2) of an IOC4T card in the rear of a VM600 ABE04x rack.

Electrical

Input voltage : −27.2 VDC (from an MPC 4 / IOC 4T card pair)

Output voltages

• −24 V output (nominal) : −25.1 VDC with no load.

−22.8 VDC at full load (25 mA).

• −18 V output (nominal) : −18.3 VDC with no load.

−17.7 VDC at full load (25 mA).

Stability of the output : Approx. 2%

Output current limitation : ≤25 mA (from MPC 4 card)

ORDERING INFORMATION

Ordering number: 200-560-900-0xx

The voltage-drop options for each channel are:

0 for a straight through (short-circuit) connection.

 The MPC 4 power supply can be set to −27.2 VDC,

 +27.2 VDC, +15 VDC or +6.16 mA as required by the

 attached sensor, signal conditioner or other circuit.

1 for a −24 VDC output.

 The MPC 4 power supply must be set to −27.2 VDC.

2 for a −18 VDC output.

 The MPC 4 power supply must be set to −27.2 VDC.

CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ TĂNG MINH PHÁT

Địa chỉ: Số 1, Đường số 27, phường Hiệp Bình Chánh, Quận Thủ Đức, Tp.HCM.

Hotline: (+84) 969 714 350   -    0914 599 052

Skype: 0969 714 350

Zalo: 0969 714 350

Email: sale16@tmpvietnam.com