Piezoelectric accelerometer CA 134 | Code 144-134-000-203

144-134-000-203

FEATURES  144-134-000-203
» From the Vibro-Meter ® product line
» Vibration monitoring over a wide temperature range, including cryogenic temperatures
» Differential output
» Hermetically welded
» Certified for use in potentially explosive atmospheres
» Frequency response:  0.5 to 6 000 Hz
» Sensitivity: 10 pC /g
» Temperature range: −253 (20 K) to 500 °C

SPECIFICATIONS  144-134-000-203
General
Input power requirements : None
Signal transmission : 2-pole system insulated from casing, charge output
Signal processing : Charge amplifier
Operating
At +23°C ±5°C (+73.4°F ±9°F)
Sensitivity (at 120 Hz) : 10 pC/g ±5%
Dynamic measuring range : 0.001 to 500 g peak
Overload capacity (spikes) : Up to 1000 g peak
Linearity : ±1% over dynamic measuring range
Transverse sensitivity : <5%
Resonant frequency (mounted) : >14 kHz nominal
Frequency response
• 0.5 to 3500 Hz : ±5% (lower cutoff frequency is determined by the electronics used)
• 3500 to 6000 Hz : <10%
Insulation resistance : Min. 108 Ω at 23°C (73°F).
Min. 105 Ω at 500°C (932°F).
Capacitance (nominal) : 450 pF pole to pole.
20 pF pole to ground.
Environmental
Temperature range
• Continuous operation : −253 (20K) to +500°C (−423 to +932°F)
• Short term survival : −253 (20K) to +520°C (−423 to +968°F)
Maximum temperature error (with respect to +23°C)
• −253°C (20K) : −5%
• +500°C : +10%
Shock acceleration : <2000 g peak (half sine, 1 ms duration) along sensitive axis
Corrosion, humidity : INCONEL® 600, stainless steel, hermetically welded
Base strain sensitivity : <7 × 10-4 g/µε

Ordering number

144-134-000-203

CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ TĂNG MINH PHÁT

Địa chỉ: Số 1, Đường số 27, phường Hiệp Bình Chánh, Quận Thủ Đức, Tp.HCM.

Hotline: (+84) 969 714 350   -    0914 599 052

Skype: 0969 714 350

Zalo: 0969 714 350

Email: sale16@tmpvietnam.com

Cảm biến rung CV213/CV214 Vibro-Meter

CV213 velocity transducer

20 mV/mm/s, −29 to 204 °C, 10 to 1000 Hz.

The CV213 velocity sensor is a high-quality, high-reliability vibration sensor with an electromagnetic sensing element providing a voltage output that is directly proportional to the vibration velocity.

The CV213 is designed and built for use in harsh environments characterised by higher temperatures, damp and corrosive environments, and/or hazardous areas (potentially explosive atmospheres).

Features
Designed for the long-term measurement of vibration in severe environments, such as hydroelectric turbines and steam turbines (lower-speed machines)
Wide frequency response: 10 to 1000 Hz
Wide temperature range: −29 to 204 °C
Voltage output (20 mV/mm/s)
Certified for use in potentially explosive atmospheres

MEGGITT SA CV213

Velocity transducer CV213 | Cảm biến rung CV213

Order Code: 110-213-000-012

MEGGITT SA CV214

Velocity transducer CV214 | Cảm biến rung CV214

Order Code: 110-214-000-012

CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ TĂNG MINH PHÁT

Địa chỉ: Số 1, Đường số 27, phường Hiệp Bình Chánh, Quận Thủ Đức, Tp.HCM.

Hotline: (+84) 969 714 350   -    0914 599 052

Skype: 0969 714 350

Zalo: 0969 714 350

Email: sale16@tmpvietnam.com

IOC 4T adaptor | Bộ nguồn IOC 4T Vibro-Meter

200-560-900-0xx

Voltage-drop adaptor

FEATURES

» From the Vibro-Meter® product line

» Voltage-drop adaptor:

−27 V input to −24 V output

−27 V input to −18 V output

or straight-through connection

» Designed for operation with MPC 4 / IOC 4T card pairs

» Inserts directly into the J1 and/or J2 screwterminal sockets of an IOC 4T card

High-quality, high-reliability voltage-drop adaptor for the MPC4/IOC4T card pairs used by VM600 rack-based machinery monitoring systems. The IOC4T voltage-drop adaptor supports 4 channels, which can be dynamic channels or tachometer (speed) channels. An IOC4T voltage-drop adaptor is installed into a screw-terminal socket (J1 or J2) of an IOC4T card in the rear of a VM600 ABE04x rack.

Electrical

Input voltage : −27.2 VDC (from an MPC 4 / IOC 4T card pair)

Output voltages

• −24 V output (nominal) : −25.1 VDC with no load.

−22.8 VDC at full load (25 mA).

• −18 V output (nominal) : −18.3 VDC with no load.

−17.7 VDC at full load (25 mA).

Stability of the output : Approx. 2%

Output current limitation : ≤25 mA (from MPC 4 card)

ORDERING INFORMATION

Ordering number: 200-560-900-0xx

The voltage-drop options for each channel are:

0 for a straight through (short-circuit) connection.

 The MPC 4 power supply can be set to −27.2 VDC,

 +27.2 VDC, +15 VDC or +6.16 mA as required by the

 attached sensor, signal conditioner or other circuit.

1 for a −24 VDC output.

 The MPC 4 power supply must be set to −27.2 VDC.

2 for a −18 VDC output.

 The MPC 4 power supply must be set to −27.2 VDC.

CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ TĂNG MINH PHÁT

Địa chỉ: Số 1, Đường số 27, phường Hiệp Bình Chánh, Quận Thủ Đức, Tp.HCM.

Hotline: (+84) 969 714 350   -    0914 599 052

Skype: 0969 714 350

Zalo: 0969 714 350

Email: sale16@tmpvietnam.com

VM600 slimline rack ABE056 | Vibro-Meter Việt Nam

VM600SYS 611-000-000

» From the Vibro-Meter® product line
» 19” slimline rack with a height of 1U
» Robust metallic construction
» Modular concept allows specific cards to be added for machinery protection or condition monitoring
» Cabinet or panel mounting
» Backplane supporting the VM600 system’s open collector (OC) bus and power supply distribution
» Integrated AC input or DC input power supply
» Power supply check relay

General
Housing : Zinc-plated painted sheet steel
Colour : Grey white (RAL 9002)
Power supply input : The power supply input has an AC or DC connector (with an RFI filter) and an on/off switch.
See Ordering information on page 5 for information on mains power supply leads (power cords).
Power supply : The integrated RPS1U power supply unit supplies the VM600 cards (processing, input/output or relay) with +5 VDC and ±12 VDC.
Inflammability class : UL 94 HB AC input power supply
Input voltage range : 90 to 264 VAC
Input frequency range : 47 to 63 Hz
Input current : 2.5 A / 115 VAC or 1.5 A / 230 VAC
Output voltages : +5 VDC and ±12 VDC
DC input power supply
Input voltage range : 18 to 58 VDC
Input current : 3.0 A / 24 VDC
Output voltages : +5 VDC and ±12 VDC
Power supply check relay
Nominal switching capacity (resistive load) : 0.5 A / 125 VAC, 0.3 A / 110 VDC, 1 A / 30 VDC
Maximum switching current : 1 A

Environmental
According to IEC 60068.2 recommendations
Operating
• Temperature : 0 to 65°C (32 to 149°F)
• Humidity : 0 to 90% non-condensing
Storage
• Temperature : −40 to 85°C (−40 to 185°F)
• Humidity : 0 to 95% non-condensing
Physical
Dimensions : See Mechanical drawings on page 4
Weight (approx.) : 2.5 kg (5.5 lb) with integrated power supply and cards

Ordering number

VM600SYS 611-000-000/Codes or VM600SYS 611-xxx-xxxY/Codes

 611-000-000/B0-C56S-D2-H00-AA1-ZA1

 611-000-000/B1-C56S-D2-H00-AA1-ZA1

 611-000-000/B2-C56S-D2-H00-AA1-ZA1

 611-000-000/B3-C56S-D2-H00-AA1-ZA1

611-000-000/B0-C56S-D5-H00-AA1-ZA1

 611-000-000/B1-C56S-D5-H00-AA1-ZA1

 611-000-000/B2-C56S-D5-H00-AA1-ZA1

 611-000-000/B3-C56S-D5-H00-AA1-ZA1

611-000-000/B0-C56S-D2-H01-AA1-ZA1

 611-000-000/B1-C56S-D2-H01-AA1-ZA1

 611-000-000/B2-C56S-D2-H01-AA1-ZA1

 611-000-000/B3-C56S-D2-H01-AA1-ZA1

611-000-000/B0-C56S-D5-H01-AA1-ZA1

 611-000-000/B1-C56S-D5-H01-AA1-ZA1

 611-000-000/B2-C56S-D5-H01-AA1-ZA1

 611-000-000/B3-C56S-D5-H01-AA1-ZA1

 611-000-000/B0-C56S-D2-HCH-AA1-ZA1

 611-000-000/B1-C56S-D2-HCH-AA1-ZA1

 611-000-000/B2-C56S-D2-HCH-AA1-ZA1

 611-000-000/B3-C56S-D2-HCH-AA1-ZA1

611-000-000/B0-C56S-D5-HCH-AA1-ZA1

 611-000-000/B1-C56S-D5-HCH-AA1-ZA1

 611-000-000/B2-C56S-D5-HCH-AA1-ZA1

 611-000-000/B3-C56S-D5-HCH-AA1-ZA1

 611-000-000/B0-C56S-D2-HEU-AA1-ZA1

 611-000-000/B1-C56S-D2-HEU-AA1-ZA1

 611-000-000/B2-C56S-D2-HEU-AA1-ZA1

 611-000-000/B3-C56S-D2-HEU-AA1-ZA1

611-000-000/B0-C56S-D5-HEU-AA1-ZA1

611-000-000/B1-C56S-D5-HEU-AA1-ZA1

611-000-000/B2-C56S-D5-HEU-AA1-ZA1

611-000-000/B3-C56S-D5-HEU-AA1-ZA1

 611-000-000/B0-C56S-D2-HUK-AA1-ZA1

 611-000-000/B1-C56S-D2-HUK-AA1-ZA1

 611-000-000/B2-C56S-D2-HUK-AA1-ZA1

 611-000-000/B3-C56S-D2-HUK-AA1-ZA1

611-000-000/B0-C56S-D5-HUK-AA1-ZA1

611-000-000/B1-C56S-D5-HUK-AA1-ZA1

611-000-000/B2-C56S-D5-HUK-AA1-ZA1

611-000-000/B3-C56S-D5-HUK-AA1-ZA1

 611-000-000/B0-C56S-D2-HJP-AA1-ZA1

 611-000-000/B1-C56S-D2-HJP-AA1-ZA1

 611-000-000/B2-C56S-D2-HJP-AA1-ZA1

 611-000-000/B3-C56S-D2-HJP-AA1-ZA1

611-000-000/B0-C56S-D5-HJP-AA1-ZA1

611-000-000/B1-C56S-D5-HJP-AA1-ZA1

611-000-000/B2-C56S-D5-HJP-AA1-ZA1

611-000-000/B3-C56S-D5-HJP-AA1-ZA1

 611-000-000/B0-C56S-D2-HUS-AA1-ZA1

 611-000-000/B1-C56S-D2-HUS-AA1-ZA1

 611-000-000/B2-C56S-D2-HUS-AA1-ZA1

 611-000-000/B3-C56S-D2-HUS-AA1-ZA1

611-000-000/B0-C56S-D5-HUS-AA1-ZA1

611-000-000/B1-C56S-D5-HUS-AA1-ZA1

611-000-000/B2-C56S-D5-HUS-AA1-ZA1

611-000-000/B3-C56S-D5-HUS-AA1-ZA1

CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ TĂNG MINH PHÁT

Địa chỉ: Số 1, Đường số 27, phường Hiệp Bình Chánh, Quận Thủ Đức, Tp.HCM.

Hotline: (+84) 969 714 350   -    0914 599 052

Skype: 0969 714 350

Zalo: 0969 714 350

Email: sale16@tmpvietnam.com

power supply ASPS | Bộ nguồn ASPS Vibro-Meter

Auxiliary sensor power supply ASPS Vibro-Meter

High-quality, high-reliability auxiliary sensor power supply for VM600 rack-based machinery monitoring systems. An ASPS auxiliary sensor power supply is installed in the rear of a VM600 ABE04x rack.

Features

• Auxiliary sensor power supply for VM600 system racks
• AC-input version (115/230 VAC)
• Two independant 24 VDC 1.1 A outputs
• Short-circuit protection
• Internal redundancy (two AC-DC converters per output) for high availability

SPECIFICATIONS

Electrical

Input voltage range : 88 to 264 VAC (47 to 63 Hz) or 125 to 373 VDC

The ASPS takes its AC mains supply from an adjacent RPS 6U rack power supply unit (AC version) in the same VM600 rack. Therefore, refer also to the input voltage range specified in the RPS 6U data sheet.

Current Consumption

• AC : 0.40 A at 230 VAC / 0.7 A at 115 VAC

Nominal output

• Voltage : 2 x 24 VDC (the two outputs can be connected in parallel)

• Current : 2 x 1.1 A (the two outputs can be connected in parallel)

• Power : 52.8 W max. (2 x 26.4 W)

Stability of the output : 1.0% (for 10 to 100% load variation) 

Ripple (output voltage noise) : 80 mV (peak to peak)

Protection against permanent shortcircuit (current limit) : Yes

Environmental

Temperature range

• Operation : −25 to +65°C (−14 to +149°F)

• Storage : −40 to +85°C (−40 to +185°F)

Relative humidity (non-condensing) : <90%

MTBF : >300000 hours, according to IEC 1709 (SN 29500)

Connectors

Conductor cross-section : ≤1.5 mm2 (max.)

Physical

Dimensions

• Height : 6 U (262 mm, 10.3 inches)

• Width : 40 mm (1.6 inches)

• Depth : 110 mm (4.3 inches)

Weight : 890 g approx

Ordering number

200-582-810-0Hh

CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ TĂNG MINH PHÁT

Địa chỉ: Số 1, Đường số 27, phường Hiệp Bình Chánh, Quận Thủ Đức, Tp.HCM.

Hotline: (+84) 969 714 350   -    0914 599 052

Skype: 0969 714 350

Zalo: 0969 714 350

Email: sale16@tmpvietnam.com

power supply RPS6U | Bộ nguồn RPS6U Vibro-Meter

VM600 RPS6U rack power supply

High-quality, high-reliability rack power supply for VM600 rack-based machinery monitoring systems. An RPS6U rack power supply is installed in the front of a VM600 ABE04x rack.

Features

• Rack power power supply for VM600 system racks
• AC-input version (115/230 VAC or 220 VDC) and DC-input versions (24 VDC and 110 VDC)
• High-power, high-performance, high-efficiency design with status indicator LEDs (IN, +5V, +12V and −12V)
• Over-voltage, short-circuit and overload protection
• Up to two RPS6U rack power supplies can be installed in a VM600 system rack to support rack power supply redundancy
• Downloads
• VM600 RPS6U rack power supply data sheet
• VM600 machinery protection system (standard version) hardware manual (LOGIN required)
• VM600 machinery protection system (CSA version) hardware manual (LOGIN required)
• VM600 machinery protection system safety manual (LOGIN required)

Ordering number

200-582-500-021

200-582-500-022

200-582-200-021

200-582-200-022

200-582-600-021

200-582-600-022

200-582-920-NHh

200-582-993-NHh

200-582-922-NHh

200-582-990-NHh

200-582-910-NHh

200-582-911-NHh

200-582-912-NHh

200-582-962-NHh

200-582-963-NHh

200-582-960-NHh

200-582-915-NHh

200-582-916-NHh

200-582-970-NHh

957.18.13.0020

957.18.13.0021

957.18.13.0022

957.18.13.0023

957.18.13.0024

957.18.13.0025

CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ TĂNG MINH PHÁT

Địa chỉ: Số 1, Đường số 27, phường Hiệp Bình Chánh, Quận Thủ Đức, Tp.HCM.

Hotline: (+84) 969 714 350   -    0914 599 052

Skype: 0969 714 350

Zalo: 0969 714 350

Email: sale16@tmpvietnam.com 

Card theo dõi độ rung XMV16 / XIO16T | Vibro Việt Nam

Card theo dõi độ rung XMV16 / XIO16T

High-quality, high-reliability condition monitoring card for VM600 rack-based machinery monitoring systems. The XMV16 card provides 16 dynamic channels and 4 tachometer (speed) channels, all of which are independently configurable. An XMV16 condition monitoring card for vibration is installed in the front of a VM600 ABE04x rack and requires an XIO16T card to form a card pair.

Features

• 16 dynamic channels and 4 tachometer channels
• Up to 20 processed outputs per dynamic channel and per dual-channel (12 per XMV16)
• Simultaneous data acquisition on all channels with asynchronous (fixed freq.) or synchronous (order tracked) sampling
• 24-bit data acquisition, high SNR data processing, with a high-resolution FFT up to 6400 lines every 1 s
• Designed for operation with the VibroSight® software

Ordering number

Type XMV16: 600-003

Type XIO16T: 620-002-000-113

Type XMVS16: 600-016

Type XIO16T: 620-002-000-113

CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ TĂNG MINH PHÁT

Địa chỉ: Số 1, Đường số 27, phường Hiệp Bình Chánh, Quận Thủ Đức, Tp.HCM.

Hotline: (+84) 969 714 350   -    0914 599 052

Skype: 0969 714 350

Zalo: 0969 714 350

Email: sale16@tmpvietnam.com

CPUM and IOCN | Card bảo vệ Vibro-Meter

Modular CPU card and input/output card CPUM and IOCN

High-quality, high-reliability rack controller and communications interface card for VM600 rack-based machinery monitoring systems. A CPUM rack controller and communications interface card is installed in the front of a VM600 ABE04x rack and can be used with an optional IOCN card.

Features

• Rack controller and communications interface for a VM600 system rack, with "one-shot" configuration of cards in the rack
• Integral LCD display to show monitored outputs and alarm limits, status indicator LEDs and an alarm reset button
• VM600 MPS rack (CPUM) security
• Fieldbus communications interfaces with support for industry standard protocols: Modbus and PROFINET
• Up to two Ethernet and up to three serial communications links, which can be used redundantly

Ordering number

Type CPUM:

601-003-000-VVV\3\610-1CC-CCC (equivalent to a 200-595-0Ss-33h with a configuration)

601-003-000-VVV\3V\610-1CC-CCC (equivalent to a 200-595-0Ss-33hl with a configuration)

601-003-000-VVV\5\610-1CC-CCC (equivalent to a 200-595-0Ss-53h with a configuration)

Type IOCN:

200-566-000-1Hh

200-566-000-1HhL 

CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ TĂNG MINH PHÁT

Địa chỉ: Số 1, Đường số 27, phường Hiệp Bình Chánh, Quận Thủ Đức, Tp.HCM.

Hotline: (+84) 969 714 350   -    0914 599 052

Skype: 0969 714 350

Zalo: 0969 714 350

Email: sale16@tmpvietnam.com

VM600 IRC4 relay card | Bo mạch bảo vệ 620-005-0Ss-1Hh Vibro-Meter

Bo mạch bảo vệ 620-005-0Ss-1Hh Vibro-Meter

High-quality, high-reliability intelligent relay card for VM600 rack-based machinery monitoring systems. An IRC4 intelligent relay card is installed in the rear of a VM600 ABE04x rack.

Features  620-005-0Ss-1Hh

• Additional relays, driven by equations with up to 86 inputs from MPC4 and/or AMC8 cards for when more complex logic such as 2oo3 voting is required
• 8 relays configurable as 8 SPDT or 4 DPDT
• Fully software configurable using the IRC4 Configurator software
• Relays configurable as normally energised (NE) or normally de-energised (NDE), with configurable delays
• All relay contacts are available on the screw-terminal connectors

» From the Vibro-Meter® product line

» 8 relays can be combined as 4 DPDT or 8 SPDT

» Each relay is controlled by a specific logic equation, which can be a combination of AND, OR, NOT or VOTE (x between y) operators

» Each relay can be latched, with reset controlled by an external discrete signal interface (DSI) input or by a specific logic equation

» 64x raw bus lines, 16x OC bus lines and 6x external DSI inputs can be used as terms of the equations

» Each relay can be set to NE or NDE

» Delays can be set on each relay to ensure glitchfree operation

» 4 external DSI inputs can be used as general purpose inputs for the logic equations

» External AR and DB DSI inputs act as alarm (latch) reset and danger bypass

» Fully software configurable

» Non volatile configuration

» Screw terminal strip connectors (32 terminals)

» Ensures EMI protection for all inputs and outputs

» Live insertion / removal of cards (hot-swappable)

Relay card characteristics

Presentation : Eight 8 relay PCB

External connections : Two 16-contact screw terminal strip connectors (J1 and J2)

Mounting : Installs in the rear of a VM600 rack and connects to the rack’s backplane via a connector

Power supply

Power supply to IRC4 : +5 VDC / 0.50 A and +12 VDC / 0.01 A

Environmental

Operating

• Temperature : −25 to +65°C (−13 to +149°F)

• Humidity : 0 to 90% non-condensing

Storage

• Temperature : −40 to +85°C (−40 to +185°F)

• Humidity : 0 to 90% non-condensing

Vibration and shock : See general rack specifications

Physical

Height : 6U (262 mm, 10.3 in)

Width : 20 mm (0.8 in)

Depth : 125 mm (4.9 in)

Weight : 0.30 kg (0.66 lb)

Ordering number

620-005-0Ss-1Hh

601-001-CCC-VVv

CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ TĂNG MINH PHÁT

Địa chỉ: Số 1, Đường số 27, phường Hiệp Bình Chánh, Quận Thủ Đức, Tp.HCM.

Hotline: (+84) 969 714 350   -    0914 599 052

Skype: 0969 714 350

Zalo: 0969 714 350

Email: sale16@tmpvietnam.com

VM600 RLC16 relay card | Thẻ Card bảo vệ Vibro-Meter

VM600 RLC16 relay card

High-quality, high-reliability relay card for VM600 rack-based machinery monitoring systems. A RLC16 relay card is installed in the rear of a VM600 ABE04x rack.

Features

• Additional relays, driven by MPC4 and/or AMC8 card signals for when the 4 relays on the IOC4T and IOC8T cards are not enough
• 16 SPDT relays
• Hardware configurable
• Relays configurable as normally energised (NE) or normally de-energised (NDE)
• All relay contacts are available on the screw-terminal connectors

SPECIFICATIONS

Relay characteristics

Relay names : RL1 to RL16

Type : PE014005

Contact arrangement : 1x COM, 1x NC and 1x NO contact/relay.

All relay contacts are available on J1, J2 and J3.

Nominal rated voltage : 250 VAC

Nominal rated current : 5 AAC

Maximum breaking capacity (without contact protection) : 1250 VA

Operate / release / bounce time : Typically 8 / 8 / 6 ms

Dielectric strength test voltages

• Between open contacts : 1000 VAC

• Between contact and coil : 4000 VAC

Mechanical life : 15 x 106 operations

Electrical life : >105 operations

Ordering number

200-570-000-1Hh

200-570-000-2Hh 

CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ TĂNG MINH PHÁT

Địa chỉ: Số 1, Đường số 27, phường Hiệp Bình Chánh, Quận Thủ Đức, Tp.HCM.

Hotline: (+84) 969 714 350   -    0914 599 052

Skype: 0969 714 350

Zalo: 0969 714 350

Email: sale16@tmpvietnam.com

VM600 card and input /output | Vibro-Meter Việt Nam

VM600 card and input /output

High-quality, high-reliability analog monitoring card – with SIL 2 approval – for VM600 rack-based machinery monitoring systems. The AMC8 card provides 8 temperature or process monitoring channels, all of which are independently configurable. An AMC8 analog monitoring card is installed in the front of a VM600 ABE04x rack and requires an IOC8T card to form a card pair.

Features

• 8 temperature or process monitoring channels
• 1 processed output per channel and 1 processed output per multi-channel (4 per AMC8)
• Highly configurable card supports temperature monitoring using thermocouples and/or RTDs, and process monitoring using current and/or voltage inputs
• Highly integrated card pair (with IOC8T) includes DC outputs, relays and serial communications interfaces
• Designed for operation with the VM600 MPSx software

ORDERING INFORMATION IOC8T

200-550-0SS-1Hh

200-550-0SS-2Hh

200-580-000-1Hh

200-580-000-2Hh

VM600 IOC4T input/output card | Vibro-meter Việt Nam

VM600 IOC4T input/output card - Bo mạch IOC4T 

High-quality, high-reliability interface (input/output) card for the MPC4 and MPC4SIL machinery protection cards used by VM600 rack-based machinery monitoring systems. The IOC4T card supports 4 dynamic channels and 2 tachometer (speed) channels, all of which are independently configurable. An IOC4T interface card is installed in the rear of a VM600 ABE04x rack, directly behind an MPC4 card or MPC4SIL card, to form a card pair.

Features

• Input/output (interface) card for an MPC4 or MPC4SIL card – supports 4 dynamic channels and 2 tachometer channels
• Differential signal input with sensor power supply output per dynamic channel and per tachometer channel
• Differential buffered (raw) transducer output per dynamic channel
• DC output configurable as current-based signal (4 to 20 mA) or voltage-based signal (0 to 10 V) per dynamic channel
• 4 configurable relays with two contacts available per relay, and alarm reset (AR), danger bypass (DB) and trip multiply (TM) control inputs

SPECIFICATIONS

Vibration inputs

Filtering : Filtered for protection against electromagnetic interference (conforms to EC standards).

Refer to the MPC4 data sheet for additional specifications.

Vibration outputs

Filtering : Filtered for protection against electromagnetic interference (conforms to EC standards).

Refer to the MPC4 data sheet for additional specifications.

Speed / phase reference inputs

Filtering : Filtered for protection against electromagnetic interference (conforms to EC standards).

Refer to the MPC4 data sheet for additional specifications.

DSI control signal inputs

Operating principle : Detection of an open or closed circuit on the input

Alarm reset (AR) : A closed contact between the AR and RET inputs resets latched alarms

Danger bypass (DB) : A closed contact between the DB and RET inputs allows the operator to inhibit the danger relay outputs

Trip multiply (TM) : A closed contact between the TM and RET inputs, multiplies the alarm levels by a scale factor (software settable).

When TM is open, the scale factor is not taken into account.

Alarm outputs

Quantity and type : 32 outputs on rack backplane bus, for use by the VM600 relay cards: the IRC4 intelligent relay card and the RLC16 relay card

DC outputs

Number of outputs : 4 per IOC4T card

Signal range : 0 to 10 V or 4 to 20 mA (selectable by jumper on IOC4T for each output).

Note: An output range of 0 to 23 mA is available for applications where the current signal is also used to monitor open and short circuits.

Accuracy : ≤ ±0.5%

Linearity error : ≤ ±0.5%

Admissible load on output : > 100 kΩ for voltage output < 325 Ω for current output

Relay characteristics

Relay names : RL1 to RL4

Type : PE014005

Contact arrangement : 1 x NC or 1 x NO contact/relay (user selectable).

The selected contacts are available on J2.

Nominal rated voltage : 250 VAC

Nominal rated current : 5 AAC

Maximum breaking capacity (without contact protection) : 1250 VA

Ordering number:

200-560-000-1Hh200-560-000-2Hh

VM600 MPC4 Bo mạch bảo vệ máy Vibro-meter

Card 200-510-SSS

» From the Vibro-Meter® product line
» Continuously online machinery protection card
» Real-time measurement and monitoring using state-of-the-art DSP techniques
» 4 dynamic signal inputs and 2 tachometer (speed) inputs, all individually programmable
» Programmable broad-band and narrow-band filters
» Simultaneous amplitude and phase monitoring in order tracking mode
» Programmable Alert, Danger and OK set points
» Adaptive Alert and Danger levels
» Front panel BNC connectors for easy analysis of raw signals
» 7 front panel LEDs show status and alarms
» Integrated power supply for many Vibro-Meter front-ends, including ICP accelerometers and proximity systems
» Live insertion and removal of cards
» Available in ‘standard’, ‘separate circuits’ and ‘safety’ (SIL) versions

SPECIFICATIONS 200-510-SSS

Dynamic signal inputs
Number of inputs : 4 per MPC4 card
DC range : 0 to +20 V or 0 to −20 V
AC range : ±10 V (maximum)
Common mode voltage range : −50 to +50 V
CMRR : >60 dB at 50 Hz
Crosstalk : −72 dB
Input impedance : 200 kΩ
Current input range
• DC signals : 0 to 25 mA
• AC signals : ±8 mA (maximum)
Analog AC frequency band (without integration): 0.1 Hz to 10 kHz
Analog AC frequency band (with integration): 2.5 Hz to 10 kHz
Analog frequency band for throughput to other cards and buffered AC outputs : DC to 60 kHz (−3 dB)
Current measuring resistor : 324.5 Ω
Processing options
Broad-band
Filtering options : High-pass, low-pass or band-pass
LP/HP ratio in pass band : 500 (maximum)
Ripple : ±0.3 dB
Slope : 6 to 60 dB/octave (software configurable)
Attenuation outside pass band : >50 dB
Amplitude accuracy : ±1% of full-scale
Linearity error : <±1%
Equivalent input noise: <200 µV RMS
Relative shaft vibration
Frequency band
• Vibration : 0.1 Hz to 10 kHz
• Gap/position : DC to 1 Hz
Amplitude accuracy
• Vibration : ±1.2% of full-scale
• Gap/position : ±1% of full-scale
• Linearity error : <±1%
Initial gap/offset compensation : Available
Buffered (raw) dynamic signal outputs
These signals are available on the MPC4 card’s BNC outputs and the IOC4T card’s raw outputs.
Frequency range : DC to 10 kHz (−0.1 dB or 1%).
DC to 60 kHz (−3 dB).
Admissible load on output : >50 kΩ
Amplitude error : <2%
Phase error : <5° (DC to 10 kHz)
Transfer ratio
• Voltage input : 1 V/V
• Current input : 0.3245 V/mA

Ordering number

200-510-SSS-1Hh
200-510-SSS-2Hh
200-510-SSS-3Hh