Piezoelectric accelerometer CA 134 | Code 144-134-000-203

144-134-000-203

FEATURES  144-134-000-203
» From the Vibro-Meter ® product line
» Vibration monitoring over a wide temperature range, including cryogenic temperatures
» Differential output
» Hermetically welded
» Certified for use in potentially explosive atmospheres
» Frequency response:  0.5 to 6 000 Hz
» Sensitivity: 10 pC /g
» Temperature range: −253 (20 K) to 500 °C

SPECIFICATIONS  144-134-000-203
General
Input power requirements : None
Signal transmission : 2-pole system insulated from casing, charge output
Signal processing : Charge amplifier
Operating
At +23°C ±5°C (+73.4°F ±9°F)
Sensitivity (at 120 Hz) : 10 pC/g ±5%
Dynamic measuring range : 0.001 to 500 g peak
Overload capacity (spikes) : Up to 1000 g peak
Linearity : ±1% over dynamic measuring range
Transverse sensitivity : <5%
Resonant frequency (mounted) : >14 kHz nominal
Frequency response
• 0.5 to 3500 Hz : ±5% (lower cutoff frequency is determined by the electronics used)
• 3500 to 6000 Hz : <10%
Insulation resistance : Min. 108 Ω at 23°C (73°F).
Min. 105 Ω at 500°C (932°F).
Capacitance (nominal) : 450 pF pole to pole.
20 pF pole to ground.
Environmental
Temperature range
• Continuous operation : −253 (20K) to +500°C (−423 to +932°F)
• Short term survival : −253 (20K) to +520°C (−423 to +968°F)
Maximum temperature error (with respect to +23°C)
• −253°C (20K) : −5%
• +500°C : +10%
Shock acceleration : <2000 g peak (half sine, 1 ms duration) along sensitive axis
Corrosion, humidity : INCONEL® 600, stainless steel, hermetically welded
Base strain sensitivity : <7 × 10-4 g/µε

Ordering number

144-134-000-203

CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ TĂNG MINH PHÁT

Địa chỉ: Số 1, Đường số 27, phường Hiệp Bình Chánh, Quận Thủ Đức, Tp.HCM.

Hotline: (+84) 969 714 350   -    0914 599 052

Skype: 0969 714 350

Zalo: 0969 714 350

Email: sale16@tmpvietnam.com

Cảm biến rung CV213/CV214 Vibro-Meter

CV213 velocity transducer

20 mV/mm/s, −29 to 204 °C, 10 to 1000 Hz.

The CV213 velocity sensor is a high-quality, high-reliability vibration sensor with an electromagnetic sensing element providing a voltage output that is directly proportional to the vibration velocity.

The CV213 is designed and built for use in harsh environments characterised by higher temperatures, damp and corrosive environments, and/or hazardous areas (potentially explosive atmospheres).

Features
Designed for the long-term measurement of vibration in severe environments, such as hydroelectric turbines and steam turbines (lower-speed machines)
Wide frequency response: 10 to 1000 Hz
Wide temperature range: −29 to 204 °C
Voltage output (20 mV/mm/s)
Certified for use in potentially explosive atmospheres

MEGGITT SA CV213

Velocity transducer CV213 | Cảm biến rung CV213

Order Code: 110-213-000-012

MEGGITT SA CV214

Velocity transducer CV214 | Cảm biến rung CV214

Order Code: 110-214-000-012

CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ TĂNG MINH PHÁT

Địa chỉ: Số 1, Đường số 27, phường Hiệp Bình Chánh, Quận Thủ Đức, Tp.HCM.

Hotline: (+84) 969 714 350   -    0914 599 052

Skype: 0969 714 350

Zalo: 0969 714 350

Email: sale16@tmpvietnam.com

IOC 4T adaptor | Bộ nguồn IOC 4T Vibro-Meter

200-560-900-0xx

Voltage-drop adaptor

FEATURES

» From the Vibro-Meter® product line

» Voltage-drop adaptor:

−27 V input to −24 V output

−27 V input to −18 V output

or straight-through connection

» Designed for operation with MPC 4 / IOC 4T card pairs

» Inserts directly into the J1 and/or J2 screwterminal sockets of an IOC 4T card

High-quality, high-reliability voltage-drop adaptor for the MPC4/IOC4T card pairs used by VM600 rack-based machinery monitoring systems. The IOC4T voltage-drop adaptor supports 4 channels, which can be dynamic channels or tachometer (speed) channels. An IOC4T voltage-drop adaptor is installed into a screw-terminal socket (J1 or J2) of an IOC4T card in the rear of a VM600 ABE04x rack.

Electrical

Input voltage : −27.2 VDC (from an MPC 4 / IOC 4T card pair)

Output voltages

• −24 V output (nominal) : −25.1 VDC with no load.

−22.8 VDC at full load (25 mA).

• −18 V output (nominal) : −18.3 VDC with no load.

−17.7 VDC at full load (25 mA).

Stability of the output : Approx. 2%

Output current limitation : ≤25 mA (from MPC 4 card)

ORDERING INFORMATION

Ordering number: 200-560-900-0xx

The voltage-drop options for each channel are:

0 for a straight through (short-circuit) connection.

 The MPC 4 power supply can be set to −27.2 VDC,

 +27.2 VDC, +15 VDC or +6.16 mA as required by the

 attached sensor, signal conditioner or other circuit.

1 for a −24 VDC output.

 The MPC 4 power supply must be set to −27.2 VDC.

2 for a −18 VDC output.

 The MPC 4 power supply must be set to −27.2 VDC.

CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ TĂNG MINH PHÁT

Địa chỉ: Số 1, Đường số 27, phường Hiệp Bình Chánh, Quận Thủ Đức, Tp.HCM.

Hotline: (+84) 969 714 350   -    0914 599 052

Skype: 0969 714 350

Zalo: 0969 714 350

Email: sale16@tmpvietnam.com

VM600 slimline rack ABE056 | Vibro-Meter Việt Nam

VM600SYS 611-000-000

» From the Vibro-Meter® product line
» 19” slimline rack with a height of 1U
» Robust metallic construction
» Modular concept allows specific cards to be added for machinery protection or condition monitoring
» Cabinet or panel mounting
» Backplane supporting the VM600 system’s open collector (OC) bus and power supply distribution
» Integrated AC input or DC input power supply
» Power supply check relay

General
Housing : Zinc-plated painted sheet steel
Colour : Grey white (RAL 9002)
Power supply input : The power supply input has an AC or DC connector (with an RFI filter) and an on/off switch.
See Ordering information on page 5 for information on mains power supply leads (power cords).
Power supply : The integrated RPS1U power supply unit supplies the VM600 cards (processing, input/output or relay) with +5 VDC and ±12 VDC.
Inflammability class : UL 94 HB AC input power supply
Input voltage range : 90 to 264 VAC
Input frequency range : 47 to 63 Hz
Input current : 2.5 A / 115 VAC or 1.5 A / 230 VAC
Output voltages : +5 VDC and ±12 VDC
DC input power supply
Input voltage range : 18 to 58 VDC
Input current : 3.0 A / 24 VDC
Output voltages : +5 VDC and ±12 VDC
Power supply check relay
Nominal switching capacity (resistive load) : 0.5 A / 125 VAC, 0.3 A / 110 VDC, 1 A / 30 VDC
Maximum switching current : 1 A

Environmental
According to IEC 60068.2 recommendations
Operating
• Temperature : 0 to 65°C (32 to 149°F)
• Humidity : 0 to 90% non-condensing
Storage
• Temperature : −40 to 85°C (−40 to 185°F)
• Humidity : 0 to 95% non-condensing
Physical
Dimensions : See Mechanical drawings on page 4
Weight (approx.) : 2.5 kg (5.5 lb) with integrated power supply and cards

Ordering number

VM600SYS 611-000-000/Codes or VM600SYS 611-xxx-xxxY/Codes

 611-000-000/B0-C56S-D2-H00-AA1-ZA1

 611-000-000/B1-C56S-D2-H00-AA1-ZA1

 611-000-000/B2-C56S-D2-H00-AA1-ZA1

 611-000-000/B3-C56S-D2-H00-AA1-ZA1

611-000-000/B0-C56S-D5-H00-AA1-ZA1

 611-000-000/B1-C56S-D5-H00-AA1-ZA1

 611-000-000/B2-C56S-D5-H00-AA1-ZA1

 611-000-000/B3-C56S-D5-H00-AA1-ZA1

611-000-000/B0-C56S-D2-H01-AA1-ZA1

 611-000-000/B1-C56S-D2-H01-AA1-ZA1

 611-000-000/B2-C56S-D2-H01-AA1-ZA1

 611-000-000/B3-C56S-D2-H01-AA1-ZA1

611-000-000/B0-C56S-D5-H01-AA1-ZA1

 611-000-000/B1-C56S-D5-H01-AA1-ZA1

 611-000-000/B2-C56S-D5-H01-AA1-ZA1

 611-000-000/B3-C56S-D5-H01-AA1-ZA1

 611-000-000/B0-C56S-D2-HCH-AA1-ZA1

 611-000-000/B1-C56S-D2-HCH-AA1-ZA1

 611-000-000/B2-C56S-D2-HCH-AA1-ZA1

 611-000-000/B3-C56S-D2-HCH-AA1-ZA1

611-000-000/B0-C56S-D5-HCH-AA1-ZA1

 611-000-000/B1-C56S-D5-HCH-AA1-ZA1

 611-000-000/B2-C56S-D5-HCH-AA1-ZA1

 611-000-000/B3-C56S-D5-HCH-AA1-ZA1

 611-000-000/B0-C56S-D2-HEU-AA1-ZA1

 611-000-000/B1-C56S-D2-HEU-AA1-ZA1

 611-000-000/B2-C56S-D2-HEU-AA1-ZA1

 611-000-000/B3-C56S-D2-HEU-AA1-ZA1

611-000-000/B0-C56S-D5-HEU-AA1-ZA1

611-000-000/B1-C56S-D5-HEU-AA1-ZA1

611-000-000/B2-C56S-D5-HEU-AA1-ZA1

611-000-000/B3-C56S-D5-HEU-AA1-ZA1

 611-000-000/B0-C56S-D2-HUK-AA1-ZA1

 611-000-000/B1-C56S-D2-HUK-AA1-ZA1

 611-000-000/B2-C56S-D2-HUK-AA1-ZA1

 611-000-000/B3-C56S-D2-HUK-AA1-ZA1

611-000-000/B0-C56S-D5-HUK-AA1-ZA1

611-000-000/B1-C56S-D5-HUK-AA1-ZA1

611-000-000/B2-C56S-D5-HUK-AA1-ZA1

611-000-000/B3-C56S-D5-HUK-AA1-ZA1

 611-000-000/B0-C56S-D2-HJP-AA1-ZA1

 611-000-000/B1-C56S-D2-HJP-AA1-ZA1

 611-000-000/B2-C56S-D2-HJP-AA1-ZA1

 611-000-000/B3-C56S-D2-HJP-AA1-ZA1

611-000-000/B0-C56S-D5-HJP-AA1-ZA1

611-000-000/B1-C56S-D5-HJP-AA1-ZA1

611-000-000/B2-C56S-D5-HJP-AA1-ZA1

611-000-000/B3-C56S-D5-HJP-AA1-ZA1

 611-000-000/B0-C56S-D2-HUS-AA1-ZA1

 611-000-000/B1-C56S-D2-HUS-AA1-ZA1

 611-000-000/B2-C56S-D2-HUS-AA1-ZA1

 611-000-000/B3-C56S-D2-HUS-AA1-ZA1

611-000-000/B0-C56S-D5-HUS-AA1-ZA1

611-000-000/B1-C56S-D5-HUS-AA1-ZA1

611-000-000/B2-C56S-D5-HUS-AA1-ZA1

611-000-000/B3-C56S-D5-HUS-AA1-ZA1

CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ TĂNG MINH PHÁT

Địa chỉ: Số 1, Đường số 27, phường Hiệp Bình Chánh, Quận Thủ Đức, Tp.HCM.

Hotline: (+84) 969 714 350   -    0914 599 052

Skype: 0969 714 350

Zalo: 0969 714 350

Email: sale16@tmpvietnam.com

power supply ASPS | Bộ nguồn ASPS Vibro-Meter

Auxiliary sensor power supply ASPS Vibro-Meter

High-quality, high-reliability auxiliary sensor power supply for VM600 rack-based machinery monitoring systems. An ASPS auxiliary sensor power supply is installed in the rear of a VM600 ABE04x rack.

Features

• Auxiliary sensor power supply for VM600 system racks
• AC-input version (115/230 VAC)
• Two independant 24 VDC 1.1 A outputs
• Short-circuit protection
• Internal redundancy (two AC-DC converters per output) for high availability

SPECIFICATIONS

Electrical

Input voltage range : 88 to 264 VAC (47 to 63 Hz) or 125 to 373 VDC

The ASPS takes its AC mains supply from an adjacent RPS 6U rack power supply unit (AC version) in the same VM600 rack. Therefore, refer also to the input voltage range specified in the RPS 6U data sheet.

Current Consumption

• AC : 0.40 A at 230 VAC / 0.7 A at 115 VAC

Nominal output

• Voltage : 2 x 24 VDC (the two outputs can be connected in parallel)

• Current : 2 x 1.1 A (the two outputs can be connected in parallel)

• Power : 52.8 W max. (2 x 26.4 W)

Stability of the output : 1.0% (for 10 to 100% load variation) 

Ripple (output voltage noise) : 80 mV (peak to peak)

Protection against permanent shortcircuit (current limit) : Yes

Environmental

Temperature range

• Operation : −25 to +65°C (−14 to +149°F)

• Storage : −40 to +85°C (−40 to +185°F)

Relative humidity (non-condensing) : <90%

MTBF : >300000 hours, according to IEC 1709 (SN 29500)

Connectors

Conductor cross-section : ≤1.5 mm2 (max.)

Physical

Dimensions

• Height : 6 U (262 mm, 10.3 inches)

• Width : 40 mm (1.6 inches)

• Depth : 110 mm (4.3 inches)

Weight : 890 g approx

Ordering number

200-582-810-0Hh

CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ TĂNG MINH PHÁT

Địa chỉ: Số 1, Đường số 27, phường Hiệp Bình Chánh, Quận Thủ Đức, Tp.HCM.

Hotline: (+84) 969 714 350   -    0914 599 052

Skype: 0969 714 350

Zalo: 0969 714 350

Email: sale16@tmpvietnam.com

power supply RPS6U | Bộ nguồn RPS6U Vibro-Meter

VM600 RPS6U rack power supply

High-quality, high-reliability rack power supply for VM600 rack-based machinery monitoring systems. An RPS6U rack power supply is installed in the front of a VM600 ABE04x rack.

Features

• Rack power power supply for VM600 system racks
• AC-input version (115/230 VAC or 220 VDC) and DC-input versions (24 VDC and 110 VDC)
• High-power, high-performance, high-efficiency design with status indicator LEDs (IN, +5V, +12V and −12V)
• Over-voltage, short-circuit and overload protection
• Up to two RPS6U rack power supplies can be installed in a VM600 system rack to support rack power supply redundancy
• Downloads
• VM600 RPS6U rack power supply data sheet
• VM600 machinery protection system (standard version) hardware manual (LOGIN required)
• VM600 machinery protection system (CSA version) hardware manual (LOGIN required)
• VM600 machinery protection system safety manual (LOGIN required)

Ordering number

200-582-500-021

200-582-500-022

200-582-200-021

200-582-200-022

200-582-600-021

200-582-600-022

200-582-920-NHh

200-582-993-NHh

200-582-922-NHh

200-582-990-NHh

200-582-910-NHh

200-582-911-NHh

200-582-912-NHh

200-582-962-NHh

200-582-963-NHh

200-582-960-NHh

200-582-915-NHh

200-582-916-NHh

200-582-970-NHh

957.18.13.0020

957.18.13.0021

957.18.13.0022

957.18.13.0023

957.18.13.0024

957.18.13.0025

CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ TĂNG MINH PHÁT

Địa chỉ: Số 1, Đường số 27, phường Hiệp Bình Chánh, Quận Thủ Đức, Tp.HCM.

Hotline: (+84) 969 714 350   -    0914 599 052

Skype: 0969 714 350

Zalo: 0969 714 350

Email: sale16@tmpvietnam.com 

Card theo dõi độ rung XMV16 / XIO16T | Vibro Việt Nam

Card theo dõi độ rung XMV16 / XIO16T

High-quality, high-reliability condition monitoring card for VM600 rack-based machinery monitoring systems. The XMV16 card provides 16 dynamic channels and 4 tachometer (speed) channels, all of which are independently configurable. An XMV16 condition monitoring card for vibration is installed in the front of a VM600 ABE04x rack and requires an XIO16T card to form a card pair.

Features

• 16 dynamic channels and 4 tachometer channels
• Up to 20 processed outputs per dynamic channel and per dual-channel (12 per XMV16)
• Simultaneous data acquisition on all channels with asynchronous (fixed freq.) or synchronous (order tracked) sampling
• 24-bit data acquisition, high SNR data processing, with a high-resolution FFT up to 6400 lines every 1 s
• Designed for operation with the VibroSight® software

Ordering number

Type XMV16: 600-003

Type XIO16T: 620-002-000-113

Type XMVS16: 600-016

Type XIO16T: 620-002-000-113

CÔNG TY TNHH THƯƠNG MẠI VÀ DỊCH VỤ TĂNG MINH PHÁT

Địa chỉ: Số 1, Đường số 27, phường Hiệp Bình Chánh, Quận Thủ Đức, Tp.HCM.

Hotline: (+84) 969 714 350   -    0914 599 052

Skype: 0969 714 350

Zalo: 0969 714 350

Email: sale16@tmpvietnam.com